High prices of raw materials have pushed the Laminates prices up again

 

High prices of raw materials have pushed the Laminates prices up again within 30 days in the year 2022. As per report, there has been an unprecedented increase in the prices of all the raw materials only in the month of March in addition to the previous recommendation made on 10.02.2022. The industry has also seen substantial increase in the cost of fuel and transport and this has resulted in an increase in the overhead cost of production.

ILMA being the representative body of laminate producers across the country has assessed the tentative impact of increase and issued advisory to all the members based on prevailing market; so that members can take appropriate decisions and suitable actions.

As per recommendation dated 8th March, 2022, the prices of 1 mm, 0.9 mm, 0.8 mm and 0.7 mm will increase Rs. 50, Rs. 40, Rs. 30 and Rs. 20 respectively. Hence the prices of 1 mm and 0.8 mm will up to Rs 90 and Rs. 70 respectively within a month.

YOU MAY ALSO LIKE TO READ

• ILMA advises: Laminate cost shooting up, price rise imminent
• Metallic Laminate Range by Nocte Veneers well Appreciated by R...
• Laminate prices may go up as Anti-dumping duty imposed on impo...
• चाइनीज डेकोर पेपर पर लगी एंटी डंपिंग ड्यूटी, लेमिनेट होगा महंग...

• 
  

Source

Supa Laminates Offer Exterior Cladding With Customisation

Supa laminates presented their latest collection of exterior cladding, decorative laminates, door skin and flush door solutions. Their newly launched cladding solution is available in 50+ shades including wooden textures on 10 years warranty. "The speciality of the cladding is that it can be customised according to the customers' requirement with minimum required volume. The cladding is UV protected and we over longer warranty of 10 years on it.

Read Full Article:- http://www.plyreporter.com/article/50890/supa-laminates-offer-exterior-cladding-with-customisation

NCR Based Ply-Lam Units To Shut For A Week

All the plywood, block boards, flush doors, decorative laminates, decorative Veneers and other products that are listed as pollution causing manufacturing units would shut down for over a week from 4 to 10th November 2018. EPCA, Environment Pollutions (Prevention & Control) Authority for National Capital Region is directed that all Industries using Coal and Biomas as fuel (excluding thermal and waste Energy Plants) to remain closed in Delhi and NCR districts from November 4 to 10, 2018. Industries that use natural gas as fuel can continue to operate.

Read Full Article:- http://www.plyreporter.com/article/20461/ncr-based-ply-lam-units-to-shut-for-a-week 

Archidply Participates In Maheshwari Global Expo

Archidply Industries Ltd participated at Maheshwari Global Expo (MGE 2019), a trade fair held from 4-7 January, 2019 at Polo Ground, Jodhpur. The company had a massive stall in the fair where they displayed their complete range of products from Decorative Laminates, Compacts, Clads, Plywood, Blockboards, Densified and Doors. It was a golden opportunity to participate in the first ever Maheshwari Global Expo 2019 for delegates of the Convention and the participants of the expo.

Read Full Article:- http://www.plyreporter.com/article/40721/archidply-participates-in-maheshwari-global-expo

0.72 mm Laminate Folders Are Eating In To 0.8 Markets

When capacity goes much beyond demand, the quality of a product takes the first toll. In a desperate selling mode, few of the HPL manufacturers began offering texture laminates at dirt cheap price to gain some foot hold in the north market. After three years this product category has gained a significant volume in tier two and tier three cities. The emergence of 0.72 mm decorative laminates in folder form are have began giving fight to 0.8 mm market share in pockets. It is also evident that 0.72 folders are gaining access to new application where cheap 0.6 or liner laminate were being used instead of adding to new customers from paint category, 0.72 mm has began eating in to 0.8 mm sales as well.

Read Full Article:- http://www.plyreporter.com/article/10138/072-mm-laminate-folders-are-eating-in-to-08-markets

Manufacturing grew PVC decorative sheet

Each growing demand for PVC laminates with last year. It is also seen that PVC Mica has taken a stake in the kitchen of high pressure decorative laminates and cupboard space. Turn capability and is helping to expand the PVC market in the growing country offering innovative designs by many producers. According to reports from the market during the last 3-4 months have been introduced almost two dozen new catalog equipped with innovative designs, thus gradually is increasing its presence in key cities. Certainly, helping grow due PVC laminate market various folders and cheap imports.

Read Full Article: -http://www.plyreporter.com/article/20124/pvc-decorative-sheet-manufacturing-on-the-rise

Alternate Materials Taking Share of Wooden Window Frames

Increasing cost of imported wood is giving a smooth road for alternate material for window frames application in metro and big cities. A recent survey in Delhi, Mumbai, Bangalore, Hyderabad, Lucknow, Chennai, Surat, Pune etc found that the builders started preferring other materials such as Aluminium, UPVC, LVL, Steel, etc for window frames. Builders say that imported wooden window frames prices are fluctuating every day, and prices are going beyond their budget, so they have started preferring alternate options.

Read Full Article:- http://www.plyreporter.com/article/20090/alternate-materials-taking-share-of-wooden-window-frames

Skilled Manpower Shortage, a Growing Worry!

Entire Indian wood panel & plywood, decorative laminates, doors, WPC/PVC, furniture and kitchen manufacturing sectors are adding to their production capacity year on year. Report says that more than 200 plywood presses are being added in ply, MDF and Particle manufacturing capacity is growing, HPL and WPC on the same way apart from addition of various next generation engineered doors units. Furniture and kitchen sectors are also expanding their production capacity etc but all are ignoring a big issue. Do the companies know that how and from where would they find skilled manpower for smooth running of their operation. Data suggests that the entire wood panel, decorative and PVC sector are making big losses may be in tune of 300-400 cr annually due to shortage of skilled manpower and lacking of able technical heads. Increasing production of B-grade materials, growing overhead cost and under utilization of installed capacity is good enough to justify the numbers.

Read Full Article:- http://www.plyreporter.com/article/20080/skilled-manpower-shortage-a-growing-worry